Subject: Re: How can i boot *anything* on Sun Blade 100?



And which cable is correct for this machine? Because now "boot cdrom" works
with 80 pin too.

It's impossible to plug the blue connector to the motherboard. The DVD's and
the HDD's connector is too far from each other then. I need to put the middle
(gray) one to the motherboard. When i got the machine it was that way.

It did not make any change if i mapped the DVD as slave or CS. What mattered
that i had to put the DVD on the same bus as the HDD. If the DVD is alone then
it only appears if it's the master.

I'll get a serial cable.

Kevin Stabel <[email protected]> írta:
>With IDE/ATA, it is vital that:- You use the correct cable, 40 or 80 pins- You
>place the devices in the right order on the cable. 80 pin cables will usually
>have color coding.  Usually blue goes on the motherboard.- Jumper the options
>correctly on the devices.  Master/slave on 40 pin cables, cable select
>preferred on 80 pin cables.For the console ...You will need to set your
>output-device and input-device via setenv to switch the console to serial.On
>Mon, Apr 10, 2017 at 5:45 PM, transmail [email protected]> wrote:Ok,
>i&#39;ll get a serial cable then. But now, the booting up works, it&#39;s now
>the OS-es what do not want to work. I&#39;ll get a DVD-R for Solaris and
>i&#39;ll wait for the next Debian image. Maybe this&#39;ll solve. As for
>FreeBSD i have no idea why it does freeze. Does the Blade still sends messages
>via serial cable after &quot;boot cdrom&quot; ?
>
>John Paul Adrian Glaubitz [email protected]> írta:
>>On 04/10/2017 03:40 PM, transmail wrote:
>>> I think, it was the SSD which confused the system. Now as SSD is alone on
>>&g...

t; the secondary

>>> channel and on the primary, the HDD is the master and the DVD is the slave,
>>> everything
>>> is visible in &quot;probe-ide&quot; and &quot;boot cdrom&quot; works. But
>>> boot FreeBSD and Debian 9 dies under
>>> the boot procedure.
>>
>>If you want people to help you, you have to provide the boot messages from
>>the serial
>>console. Anything else ends up in a guessing game.
>>
>>Adrian
>>
>>--
>> .&#39;&#39;`.  John Paul Adrian Glaubitz
>>: :&#39; :  Debian Developer - [email protected]
>>`. `&#39;   Freie Universitaet Berlin - [email protected]
>>  `-    GPG: 62FF 8A75 84E0 2956 9546  0006 7426 3B37 F5B5 F913
>>
>
>



Programming list archiving by: Enterprise Git Hosting