Subject: Re: report on debian-9.0-sparc64-NETINST-1.iso
with qemu [SOLVED]



On 27/01/17 18:52, Bruno Haible wrote:

> Yeah! This works! The machine now can connect to the internet.
> The ifconfig output now is:
>
> # /target/sbin/ifconfig
> enp0s5: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
> inet 10.0.2.15 netmask 255.255.255.0 broadcast 0.0.0.0
> inet6 fec0::5054:ff:fe12:3456 prefixlen 64 scopeid 0x40<site>
> inet6 fe80::5054:ff:fe12:3456 prefixlen 64 scopeid 0x20<link>
> ether 52:54:00:12:34:56 txqueuelen 1000 (Ethernet)
> RX packets 291 bytes 263098 (256.9 KiB)
> RX errors 0 dropped 0 overruns 0 frame 0
> TX packets 174 bytes 15608 (15.2 KiB)
> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>
> lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
> inet 127.0.0.1 netmask 255.0.0.0
> inet6 ::1 prefixlen 128 scopeid 0x10<host>
> loop txqueuelen 1 (Local Loopback)
> RX packets 0 bytes 0 (0.0 B)
> RX errors 0 dropped 0 overruns 0 frame 0
> TX packets 0 bytes 0 (0.0 B)
> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
>
> # lsmod | grep virt
> virtio_net 24168 0
> virtio_pci 14583 0
> virtio_ring 12099 2 virtio_net,virtio_pci
> virtio 6188 2 virtio_net,virtio_pci
>
> (qemu) info network
> virtio-net-pci.0:
> index=0,type=nic,model=virtio-net-pci,macaddr=52:54:00:12:34:56
> \ hostnet0: index=0,type=user,net=10.0.2.0,restrict=off
>
> Thanks a lot!
...


Excellent! I should add that qemu-system-sparc64 should support virtio
1.0 at some point when I get some time to figure out why it hangs - all
that's happened is that the default flipped from legacy to modern with
the last QEMU release which is why this is now suddenly visible.


ATB,

Mark.



Programming list archiving by: Enterprise Git Hosting