git.net

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [users@httpd] invisible server


Hi again,
back to the drawing board and this trouble telia router,

It seems that the telia router (connecting to ext network) does not serv my server with an IP address the setup in the router wants me to fill in the ipv4 address that it should have DHCP served my server with.....

when Im in the WAN advanced menu Im trying to fill in the UPnP variant for port forwarding (whatever UPnP stands for and what it does in this context....), but guess that im not to fill in for DynDNS. ( the record for forwarding though has the ETHERNET address !! which I think should suffice more than enough but not)

so still stuck, but possibly on a higher "understanding" level

----- Original Message ----- From: "Freek de Kruijf" <f.de.kruijf@xxxxxxxxx>
To: <users@xxxxxxxxxxxxxxxx>
Sent: Wednesday, October 31, 2018 2:37 PM
Subject: Re: [users@httpd] invisible server


Op woensdag 31 oktober 2018 12:48:42 CET schreef georg.chambert@xxxxxxxxx:
Hi again, didnt work to turn DHCP off, just rendered the PC/server without
IP address (ie not even the local net)

Right.

looking at WAN services, I get the following fields to fill (for "+ Add new
IPv4 port mapping" ):

IPv4 Port forwarding table

Name Protocol WAN port    LAN port Destination IP Destination
MAC



so the "Destination" in this, would that actually be the PC/server IP (which
I then guess I have to set manually in the PC )

Your PC/Server normally gets the same IP address from DHCP when it restarts,
so you can use that address as Destination.
For a web server you need to forward the external port 80 to the internal port 80 of your PC/Server. In case you use https you also need to forward 433 to
433.

--
fr.gr.

Freek de Kruijf




---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: users-help@xxxxxxxxxxxxxxxx



---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: users-help@xxxxxxxxxxxxxxxx